Sandblaster Resume Examples

Sandblasters clean dirt, rust, old paint, and grease by using sandblasting equipment. Activities such as selecting areas to be cleaned, abrading surfaces, mixing abrasives, operating equipment, directing abrasive materials towards surface of parts, examining finished parts, and adhering to safety regulations are often seen on Sandblaster resumes. Our collection of resume samples for Sandblaster reveals skills such as knowledge of sandblasting procedures, physical fitness, stamina, attention to safety, effective communication, and teamwork. A high school diploma is usually sufficient for this role.

Not exactly what you are looking for? Check our complete library of over 1000+ resume examples

Rate this Template

• Featured in:

More Sandblaster Resumes

Use these Sandblaster samples as a guideline or visit our extensive library of customizable resume templates.

Select

Customize

Download

Want a stronger resume? Use our extensive library of professional resume examples as practical starting guides. You’ll also find ready-made content with our helpful Resume Builder – simple click, customize, and download.

Find out what is the best resume for you in our Ultimate Resume Format Guide.

Additional Janitorial Resume Samples

Sandblaster Resume Samples

No results found

0-5 years of experience

Coordinated and facilitated sandblasting, grinding, and painting repairing Department of Navy ships and destroyers with Masse Construction Company at Northrup Grumman, Ingalls Shipyard, Pascagoula facility.

• Demonstrated effective presentation skills.
• Maintained high standards of excellence.
• Assisted subordinates and supervisors in resolving any identifiable problem
• Always maintaining OSHA and Masse Construction Company standards.

0-5 years of experience

Sandblasted and coated 65 miles of mainline pipe, fittings, and bore pipe.

• Worked closely with supervisor and inspector to coat and sandblast pipes in accordance with industry standards.
• Utilized holiday detectors, RD4 and RD6 tape and primer, patch sticks, and two-part coating (Densco7200 and 2888 coating for repair, Power Crete J for bore pipe).
• Strung skids and mainline pipe.
• Conducted tailgate meetings.
• Set up mainline pipe for pipe gang
• Determined amount of materials used per weld and amount of material in stock.

0-5 years of experience

Assisted Allied Erecting and Dismantling with refurbishing the former LTV steel plant to its original operational status.

• Tasks included demolition of existing structures and erecting new ones where the operation of heavy equipment was involved to just general labor.
• Some overhead crane operation was used to move equipment and miscellaneous around the plant and to other areas of the plant, some heavy equipment was also used.
• Burnt metal from existing structures to make dismantling possible, which included rebar removal and beam detachment for walls and structures to fall properly.
• Responsible for use of safe practices and clean-up on a daily basis.

0-5 years of experience

• Cleaned specified surfaces and masked other area of assigned metal products, using abrasives.
• Operated and controlled metal cleaning equipment, properly, to ensure uniform surface finish and to avoid damage from overblasting.
• Sandblasted welds on metal electric boxes
• Inspected finished parts of assigned products to ensure conformance to specifications.
• Assisted in cleaning and upkeep of work site, equipment and tools.

0-5 years of experience

• Operated machinery and cabinet types of abrasive blasting equipment to process small or moderated size metal nonmetal items
• Applied proper settings, adjustments, and manual application
• Set up portable units and prepared the work site
• Used a combination of various amounts of air pressure, multiple mounts, precise angling and accurate distance settings on blasting nozzles for objects having unusual shapes, stubborn contaminants and heavy corrosion
• Adjusted time traverse setting and made repeat adjustment of turntable movements (forward, swivel, and reverse) for optimum positioning of moderate size or large complex metal or nonmetal assemblies; and extensive or precise nozzle openings and sweeping direction in order to blast over difficult internal or external surface without causing damages to work or injury to workers nearby.
• Cleaned various types of metals, fiberglass, plastic, and other synthetic material surfaces through use acids, steam cleaners, immersion tanks, ultrasonic methods, brushes, buffers scrapers, sanders, grinders, files and any other tools or processes necessary to remove paint, sludge, grease, carbon, oil, corrosion, rust and hazardous contaminants
• Determined the correct blasting procedures as well as the accurate lengths of time to apply chemicals to surfaces before removing, and/or making adjustment to cleaning equipment such as steam cleaning, immersion vats, acids etc.
• Ensured the proper blasting, stripping and cleaning of the equipment and related components such as tanks, engines, transmission, heavy and armored vehicles, trucks, bulldozers, and wide variety of other types of ground combat equipment and components.
• Complied with all safety requirements
• Lifted loads of up to 50 pound or more in order to ensure proper removal of undesired particles

10+ years of experience

Operate sandblasting pot with multiple valves and hoses while connected to an air compressor.

• Flip large industrial fans.
• Site maintenance and clean-up.
• Load pot with 100lb bags of sand.
• Basic forklift operation.

0-5 years of experience

Assisted in the disassembly and reassembly of Tractors, Semis, and Machinery

• Performed sandblasting work on tractors, trailers, wheels, frames, metal parts, etc. for the purpose of preparing the various parts and pieces of equipment for painting.
• Paid very close attention to detail, as it was critical to ensure the precision of blasted areas.
• Regularly performed general maintenance on equipment for proper functioning, including the blaster, front load tractor, and the generator.

0-5 years of experience

Operate metal cleaning equipment to remove rust, scale and other materials from surfaces of metal products

• Clean work areas, equipment and parts
• Painting and coating
• Being aware of products specifications as applicable to area
• Other duties as assigned

0-5 years of experience

• Erected and dismantled scaffolding or other temporary structures to ensure safety and security
• Navigated and drove vehicles or mechanized equipment, such as forklifts and passenger vehicles
• Cleaned and prepared surfaces for painting, using abrasive sandblasting and power washing equipment
• Stirred paint, poured paint into spray container, and applied primer or finish coat of paint, using spray gun or paint rollers
• Disassembled and cleaned paint and sandblasting equipment
• Identified, packed, and transported hazardous materials
• Loaded, unloaded, and identified required machinery, tools, and paints, according to project plans or specifications
• Cleaned site(s) to ensure the client satisfaction

0-5 years of experience

• Prepare surfaces to be coated through appropriate grinding/sanding/polishing, cleaning, and masking.
• Remove masking, hang/remove parts form line and disperse to proper location.
• Setup and maintain equipment (blast hose, booth, filters, respirators, protective clothing)
• Set-up, operate, regulate and perform preventive maintenance on complete stationary and portable sandblasting equipment
• Masks parts to protect part number, serial number, and other identifying marks as required by technical data.
• Ensures blast media are removed from all surfaces and cavities
• Operate media blast machine, glove box type blast equipment, hand sanding and sanding with power sanders.

0-5 years of experience

• Abraded surfaces of metal or hard-composition objects to remove adhering
• Masked specified areas of object to protect from abrading action.
• Turn valves on equipment to regulate pressure and composition of abrasive
• Adhere to safety protocols.

0-5 years of experience

• Performed shipping and receiving.
• Start equipment that directs blast or flow of abrasive-laden compressed air, gas, or liquid over surface of parts.
• Abrades surfaces of metal or hard-composition objects to remove adhering scale, sand, paint, grease, tar, rust, and dirt, and to impart specified finish, using abrasive-blasting equipment.

6-10 years of experience

Sandblasted fabricated gates, fence panels and post.

• Sanded welds and drilled holes when needed.
• Hung and prep all sandblasted product and ready it for powder coating.
• Worked on all general steel, iron, and aluminum products in fence panels and gates.

0-5 years of experience

Operated Sand [company name]

• Racking Parts
• Read work orders to determine objectives
• Move controls to start, stop, or adjust machinery and equipment that blast parts
• Record data from operations
• Clean equipment and area
• Notify supervisor of needed repairs
• Reject defective parts

0-5 years of experience

Lay Out Stencil on Granit Head StonesPatch and Set Up for Sand Blast Booth

• Sand Blasts Head Stones
• Paint Head Stones to Order
• Stripe Stencil and Scrub Head Stone
• Overhead Crane Operator
• Install Head Stones at Cemetery
• Fork Truck Operator
• Load and Unload Head Stones

0-5 years of experience

• Sandblast tanks with a thorough and complete profile
• Accurately hydro test tanks and fix any leaks
• Accurately and safely use overhead crane to hang tanks at paint booth

0-5 years of experience

• Sandblast Valves and risers
• Assist with building valve site
• Spot excavator with backfilling activities
• Assist electricians
• Assemble and Install chain link fences around sites

0-5 years of experience

Overhead crane certified.

• Trained and qualified for half-mask respirators and forced air respirators
• Prepping vehicles for sandblasting
• Moving various heavy equipment
• Cleaning vehicles with pressure washers
• Sandblast qualified(mini, garnet media and glass media)
• Production time logs
• Blasting gear maintenance
• General organization
• Hazardous material and waste training and certification
• Work with various metal types and thickness

0-5 years of experience

• Sandblasted concrete panels and other objects
• Patched concrete voids and fixed broken panels
• General labor

0-5 years of experience

• Maintain all of the current jobs, and prep all jobs needing to be painted.
• Sandblast industrial items on schedule for clients.
• Paint and coat industrial items.

0-5 years of experience

• Sandblasting pipes and motors.
• Moving equipment with forklifts.
• Prepping equipment to be painted.

0-5 years of experience

• Sandblasting
• Equipment operater
• Shop maintenance

0-5 years of experience

• Refurbished Nylon
• Assisted Wrapping Inflatable and Swellable Packers
• Sandblasted Components
• Unnylon Applications
• Bonded Components
• Maintained Routings
• Retrieved Inventoried Items
• Followed all Safety and Regulatory Requirements
• Assisted in Assembly Tasks

0-5 years of experience

• Forklift
• Shipping/receiving
• Sandblasting (Booth Blasting)

0-5 years of experience

• Weld parts to fixtures
• Air arc
• Grinding
• Sandblast parts to specs
• Overhead crane operation
• Tow Motor operation
• Band Saw
• Drill Press/band saw
• Flux Core up tp 5/16 wire minum 1/16

Sandblaster Duties and Responsibilities

Based on job listings, these duties are typically assigned to sandblasters:

Operate Machinery The sandblaster uses abrasive blasting equipment to remove paint, grease, tar, rust, and dirt. The sandblaster’s control of the pressure and direction of the abrasive material is vital for preventing surface damage and injury to coworkers. The sandblaster is responsible for shoveling or pouring sand, grit, or other abrasive material into the machine, and monitoring and maintaining an adequate supply of the abrasive in the hopper.

Prepare Surfaces Before the abrading action, the sandblaster protects specific areas of the work surface using masking film, tape, and rubber.

Set Up Equipment Sandblasters are responsible for lifting, carrying, and setting up heavy equipment and parts onto racks, into tumbling barrels, or into cabinets.

Shop Operations Preparing parts for the paint shop, steam cleaning motors and chassis, and other general labor may be included in the sandblaster’s job duties.

Maintain Equipment and Work Area An important part of the sandblaster’s job is the maintenance of the sandblasting equipment, such as cleaning and changing nozzles. To prevent accidents, it is essential that the sandblaster’s work area is clean and orderly, and that any unsafe working conditions are corrected or reported immediately.

Sandblaster Skills and Qualifications

A sandblaster’s duties require physical stamina, comfort handling heavy and potentially dangerous machinery, and great attention to detail.Other essential skills include:

• Mechanical aptitude – the ability to comply with instructions in written, oral, and schedule form is essential. Sandblasters must read and comprehend manuals, inspection checklists, operating and maintenance instructions, government regulations, and other work-related information
• Physical fitness – sandblasters must be able to hear coworkers, see up close and far away, perceive color and depth, and have the ability to focus. Sandblasters may be required to stand or walk on uneven ground and ascend and descend rail cars or ladders, all of which requires stamina and endurance
• Compliance with safety procures – as part of an organization’s safety program, sandblasters are expected to complete an annual training program and pass safety examinations and all required assessments
• Interpersonal skills – the ability to clearly, professionally, and effectively communicate with their supervisor and coworkers is necessary for success
• Flexibility – a sandblaster may be required to work at night and on the weekend. At times, they may be asked to cross-train, work in other areas, or train new employees

Sandblaster Education and Training

A high school diploma or general education development (GED) certificate and a valid driver’s license are the minimum requirements needed to become a sandblaster. Generally, one to three years of surface preparation experience is preferred, but an equivalent combination of education and experience is acceptable.Forklift experience may make a candidate more attractive to employers, as might training and certification programs completed through professional associations.

Sandblaster Salary and Outlook

The Bureau of Labor Statistics (BLS) lists the national median annual salary for painters and construction and maintenance workers at $37,960. The lowest 10 percent earn less than $25,200 a year, while workers in the highest 10 percent earn more than $63,620. According to the BLS, there are over 380,000 painters and construction and maintenance workers employed in the United States. This sector is projected to grow 6 percent by 2026.

Helpful Resources

We searched the web for the best resources to help you explore a career as a sandblaster:

SSPC: The Society for Protective Coatings – this internationally recognized association offers training through online courses, webinars, and a learning center. SSPC also offers a certification program and an informal networking group of more than 5,800 members

American Galvanizers Association – AGA is dedicated to serving the needs of contractors and fabricators. This nonprofit association also maintains a large technical library and offers education and resources

NACE International – NACE provides training at its Houston facility and through online courses. The organization administers 23 certifications plus the Coating Inspector Program

Blast Journal – here you’ll find educational articles for the surface preparation industry. Sponsored by Graco, this blog provides an informative mix of trends and industry insight